Build a quality heating system with stainless steel flues AISI 304.
Stainless steel flues are single-walled pipes with laser welding, ending with a male and female part. The flue assembly is extremely precise, eliminating the need for brackets or silicone seals. The operating temperature of our stainless flue pipes is 400 ° C and the maximum temperature they can withstand is 1000 ° C. Laser welding flues are manufactured in accordance with European and International standards and are used to remove flue gases, chemical and oxidizing gases from boilers and stoves running on oil, gas, solid fuel and biomass.
Our single-walled stainless steel flues and chimneys are affordable and are most often used to connect the heating appliance to the chimney inside the building. Depending on the required size, we offer from Ф80 flues for pellet stoves to Ф350 flues for industrial boilers.
According to the place and the way in which the flues will be used, they are divided into
Straight flues - Straight stainless steel flues are used to raise the vertical part of the chimney. The standard length of straight flues is 100 cm, but we also offer flues with a length of 50 cm, as well as telescopic flues. When calculating the total length for your chimney 6 cm must be removed from the final value due to the connections between the elements. For more precise heating systems, we also offer straight flues with a built-in thermometer and flues with an inspection opening.
Elbow flue - elbows are stainless steel flues that are used to change the direction of the chimney. According to the angle, the knees are divided into: knee 90 ° and knee 45 °. It is recommended not to use the elbows more than 3 times in one heating system, as this would make it difficult to remove the flue gases.
Tee flue - tees are stainless steel flues that are used in almost every chimney system. Each tee contains a condensate cap with an opening through which condensate drains. The condensate tee cap is detachable, giving you direct access to clean your flues. According to the angle of connection to the chimney, the tees are divided into two types: T tee and U tee.
Flexible flues - Flexible flues or so-called corrugated flues are used to pass through hard-to-reach places where installation is difficult to perform. Flexible flues are extremely easy to install and are most often used for a direct connection between the chimney and the heating appliance.
