MONO PLUS 130 1PH is a powerful solution for larger houses with an area of approximately 150-200 m² or for sites with a higher heat load (older insulation, high ceilings, colder climate). Equipped with a Mitsubishi inverter compressor with EVI , the model provides up to 12.6 kW of heating capacity at A7/W35 and at the same time is characterized by extremely quiet operation - only 45 dB(A) at 1 m, which is among the best indicators in its class. It is suitable for hybrid systems with underfloor heating and DHW.
365 DAY RETURN
365 daysSee details
SECURE PAYMENTS
See details

Operation in heating and cooling modes
Built-in
Wi-Fi module
Efficient operation thanks to high COP
Effective operation
down to -25°C
SG Ready function
SUNSYSTEM MONO PLUS is a new generation of air-to-water inverter monoblock heat pumps, developed with the environmentally friendly refrigerant R32 (with low global warming potential). The series is designed to fully cover the heating , cooling and domestic hot water (DHW) needs of single-family houses and residential buildings, using renewable energy from the outside air.
The heart of the heat pump is a highly efficient inverter compressor with EVI technology (Enhanced Vapour Injection – direct injection of steam into the compressor), which guarantees stable and efficient operation even at extremely low outdoor temperatures – down to -25°C . This makes MONO PLUS a suitable solution for all climate zones in Bulgaria and Europe.
► Energy class: A+++ (at A7 / W35)
► Operating range of external temperature: from -25°C to +43°C
► Refrigerant: R32 (environmentally friendly, low GWP)
► Technology: full DC inverter + EVI compressor
► Power supply: single-phase 220-240V ~ / 50Hz
► Maximum coolant temperature: 60°C
► DHW production: up to 55°C
► Built-in Wi-Fi module – full control via smartphone from anywhere
► SG Ready function – compatibility with Smart Grid and photovoltaic systems to optimize self-consumption
► 4-inch color touch screen display with intuitive navigation
► Built-in energy-saving circulation pump – no need for an external
► Built-in expansion tank – 2 liters
► Additional electric heater: 3 kW (built-in)
► Protection class: IPX4
► Heat transfer fluid connections: G 1 1/4″
► Freon – water heat exchanger: plate
► Evaporator: finned heat exchanger

► Double-sided operation in heating and cooling mode
► High COP – low operating costs and quick payback
► Efficient operation in extreme temperatures down to -25°C thanks to EVI
► Smart Grid (SG Ready) and photovoltaic installations readiness
► Wi-Fi control via mobile app
► Quiet operation – suitable for densely built-up residential areas
► Compatible with underfloor heating , radiators and fan coils
► Simultaneous heating, cooling and DHW production
The MONO PLUS single-phase models are designed for objects with domestic single-phase power supply - single-family houses, apartments with autonomous heating, small offices, villas, etc. The choice of a specific model depends on the heated area, the level of thermal insulation and the type of heating installation (underfloor, radiators or combined).
| Characteristics | |
| Approximate surface (m²) | 200 |
| Connections | G 1 1/4″ |
| Flow rate (m³/h) | 2.1 m³/h |
| Volume of the built-in expansion tank [L] | 2 |
| Weight (kg) | 111.0000 |
| Protection class | IPX4 |
| Dimensions [mm] | 1263х440х875 |
| Nominal thermal power (kW) | 12.6 |
| Energy efficiency class | A+++ |
| Circulation pump included | Yes |
| Operating temperature range (°C) | от -25°C до +43°C |
| Voltage [V] | 220-240V ~ / 50Hz |
| Refrigerant | R32 |
| Compressor | Mitsubishi |
| Sound pressure dB(A) | 45 |
| Type | File Information |
| Heat_Pump_Sunsystem_Manual_EN.pdf File size 4.28MB |