CP110 display with keyboard allows:
Displaying information about the system
Displaying and modifying working parameters
Displaying current temperatures of the system
Setting starting and switching off programs using built-in weekly programmer
Setting user menu parameters
Setting tech..
TGD 60/1-120/20 EMMEVI - FERGAS 119308 Cross-flow fan with double blower for pellet stoves. Specific for high temperatures, it is a quiet, small and very reliable product.The 60 mm rotor create a swirling motion that generate an output air flow that is stable and uniform. Flow range 155 m³..
TGD 60/1-180/20 25/2600 EMMEVI - FERGAS 119509 Cross-flow fan with double blower for pellet stoves. Specific for high temperatures, it is a quiet, small and very reliable product.Equivalent to the following EMMEVI-FERGAS cross-flow fans 119500The 60 mm rotor create a swirling motion that genera..
TGD 60/1-270/30 EMMEVI - FERGAS 120102 Cross-flow fan with double blower for pellet stoves. Specific for high temperatures, it is a quiet, small and very reliable product.Equivalent to the following EMMEVI-FERGAS cross-flow fans 120117 - 120121 - 120122 -120100 - 120103 - 120104 - 120105 - 1201..
TGD 80/1-220/35 EMMEVI - FERGAS 164001 Cross-flow fan with double blower for pellet stoves. Specific for high temperatures, it is a quiet, small and very reliable product.Equivalent to the following EMMEVI-FERGAS cross-flow fans C00110 - 164003
EDILKAMIN ref. 288900 mod. Pellbox SCFThe 80 m..
TGD 60/1-240/20 25/2600 EMMEVI - FERGAS 119804 Cross-flow fan with double blower for pellet stoves. Specific for high temperatures, it is a quiet, small and very reliable product.Equivalent to the following EMMEVI-FERGAS cross-flow fans 119801 - 119803The 60mm rotor create a swirling motion tha..
The GT fan is equipped with single-speed electrical capacitor motor, painted sheet metal scrollcase and plastic impeller.
Characterized by insulation class F and TP thermal protection it is indicated for use in the distribution of the warm air produced by the biomass stove or boiler into the dom..
The emergency console Micronova PL026 with built-in antenna can be connected to a mainboard via flat cable and allows to change some of the operation paramatres of the stove without using a remote control. Also allows monitoring the status of the stove and its alarms through the LEDs.
The consol..
Optional module for Micronova I023_5 mainboards is used in hydro models when it's necessary to enable additional controls such as:
Heat exchanger
Domestic Hot Water pump
..
Optional module for micronova K023 mainboards is used in hydro models when it's necessary to enable additional controls such as:
gas boiler heat exchanger
servo motor control for air valve
mechanical cleaner
..
The K-type sensor is measuring the temperature of the pellet system's exhaust gases.
This type of sensor is mainly used in pellet stoves Eco Spar with Mainboard Fumis Alpha. ..
The sensor of the device is installed under the hopper in pellet systems stopping the operation of the pellet stove if the temperature exceeds the safety limit of 110°C...
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
The wide range of K911 gearmotors offers polechanging AC motors and permanent magnet DC motors. Designed for low speed and high torque applications. The connection between motor and reduction gear is achieved through a helical toothing gear on the motor shaft, which is kept in position through ..
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
This geared motor was originally designed to complement our range between the FBT3 and UBT6. Designed with a slimline gearbox but with high torque capability allowing this unit to be used in many applications where space is limited but a high torque is required. Typical applications include pellet s..
The cross flow blower forces the cold air from the room into the pellet stoves and blows the hot air from the stove back into the room. Suitable for the 10kw Eco Spar pellet stoves air models...
Used for the ignition and burning of pellets in pellet stoves.
Suitable for 12kW, 18kW, 25kW, 27kW, 33kW и 42kW pellet stoves Ecospar hydro models.
Suitable for Comfort PM 15kW, 23kW Burnit models..
Resistor for pellet stove lighting - igniter, HT62651 - HT56124 - HT55726 designed to light pellets and wood chips for stoves boilers and burners.
For stoves PIAZZETTA - CS THERMOS - ADLER - SUPERIOR mod. Модели Cleo, Gioia, Lia, Lisa, Maira, Marcella, Mia, Mi..
Heating element for pellet stove HT62652 - HT65012 designed to light pellets and wood chips for stoves boilers and burners.
For stoves: CS THERMOS - UNGARO - SUPERIOR
KARMEK ONE mod. Amelia, Aquos, Barcellona, Elektra, Elena, Greta, Londra, Marylin, Parigi..
Resistor for pellet stove lighting - igniter, HT62649, designed to light pellets and wood chips for stoves boilers and burners.
Compatible HT56135
For stoves DIELLE - PRITY- AMG - AMBIENTE E CALORE - KALON - GOOD FIRE - CADEL mod. Erika, Slim, Titania, Adina, Aida, Cloe, Cloe..
Resistor for pellet stove lighting - igniter UTXM016013 designed to light pellets and wood chips for stoves, boilers and burners.
For stoves ARCE - EUROFIAMMA Furbetta - EUROSTEACK Scintilla - CADEL Family
Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
Resistor for pellet stove lighting - igniter, HT62660 - HT62124 designed to light pellets and wood chips for stoves boilers and burners.
For stoves CT PASQUALICCHIO - ROYAL - PALAZZETTI mod. Maxi idro
Tested for more than 10,000 ON/OFF cycles,..
Used for the ignition and burning of pellets in pellet stoves. Suitable for 6kw, 8kw and 10kw Ecospar air models.
Burnit - Comfort PD 6kW, 8kW, 10kW ..
Resistor for pellet stove lighting - igniter, UTXS019406 - HT56178 designed to light pellets and wood chips for stoves boilers and burners.
For stoves: ECOFOREST mod. Atenas, Aveiro, Basic, Boston Insert, Bremen, Cantina, Cantina Nova и Sup..
Resistor with threaded connection 1/2" for pellet stove lighting - igniter, HT54489, designed to light pellets and wood chips for stoves boilers and burners.
For stoves: ECOSYSTEM
Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
Resistor for pellet stove lighting - igniter, HT62688, designed to light pellets and wood chips for stoves, boilers and burners.
For stoves: ECOTECK - SICALOR - LA NORDICA - ITALCALOR - RAVELLI
Tested for more than 10,000 ON/OFF cycles, with rapid ignition times...
Resistor for pellet stove lighting - igniter, UTXS010384 designed to light pellets and wood chips for stoves boilers and burners.
For stoves EDILKAMIN - ITALIANA CAMINI mod. ALBA MAREA 2003 / 2004 - ATENA - ARTEMIDE - ADRIANA - FOX 2 / FOX 3
Edilkamin code 207780
Equivalent to..
Resistor for pellet stove lighting - igniter, UTXS020198 designed to light pellets and wood chips for stoves boilers and burners.
For stoves: EDILKAMIN - ITALIANA CAMINI mod. ALBA MAREA 2003 / 2004 - ATENA - ARTEMIDE - ARIANNA - FOX 1 / FOX 2 / FOX 3
Equivalent to: UT10384 - ..
Resistor for pellet stove lighting - igniter, HT62685 edilkamin 264050 - 248510 -300W L154/671 C/PUN ( RICA 579H/1 230V 300W 6110278 ) designed to light pellets and wood chips for stoves, boilers and burners.
Compatible with HT48485 - 48485 but with more strenght.&..
Kit for pellet stove cartridge resistor - igniter with resistor tube, air-canalizing tube UTXS012197 designed to light pellets, wood chips, and other lignocellulose biomasses.
For stoves ENVIRO FIRE - EF2, EF3, EF4
Tested for more than 10.000 ON/OFF cycles, with rapid ignition tim..
Resistor for pellet stove lighting - igniter, UTXS022576 designed to light pellets and wood chips for stoves boilers and burners.
For stoves: ENVIRO FIRE - Bern, EF5 Evolution, Meridian, Windsor, EF Thermo 28
Tested for more than 10,000 ON/OFF cycles, with rapid ignition..