Wood Burning Stove Prity K2N D, 11.5 kW

Wood Burning Stove Prity K2N D, 11.5 kW – Very Low Emissions to the Ecodesign Standard

The Prity K2N D wood burning stove, with a heat output of 11.5 kW, combines high output with exceptionally clean combustion. It has energy class A (energy efficiency index EEI 106) and an efficiency of 80.2%, and its carbon monoxide and dust emissions are among the lowest in the Prity range – 708 mg/Nm³ CO and 22.8 mg/Nm³ dust. The stove fully meets the requirements of the European Ecodesign standard. The low flue gas temperature – only 201 °C – shows that more heat stays in the room instead of escaping through the chimney. The body is made of steel with heat-resistant paint, and the combustion chamber is lined with vermiculite, which retains heat and keeps the combustion temperature high. The stove is made in Bulgaria by Prity 95 Ltd – a manufacturer of heating appliances since 1995.

Advantages of the Prity K2N D Stove

• Compliance with the Ecodesign standard – low harmful emissions, high efficiency and clean burning of wood.
• Very low emissions – CO 708 mg/Nm³ and dust 22.8 mg/Nm³, far below the permitted limits.
• Energy class A (EEI 106) and 80.2% efficiency – more heat from the same amount of wood.
• Low flue gas temperature – 201 °C – less heat escapes through the chimney and more stays in your home.
• Heat output of 11.5 kW – enough for spacious rooms.
• Vermiculite lining – retains the heat in the combustion chamber and keeps the combustion temperature high.
• Steel body with heat-resistant paint – a sturdy construction that keeps its appearance through long-term use.
• Glass door – watch the flame without opening the door unnecessarily, so no heat is lost.

Efficiency and Energy Class

The Prity K2N D has energy class A (energy efficiency index EEI 106), an efficiency of 80.2% at nominal output and a seasonal energy efficiency of 70.2%. It fully meets the requirements of the Ecodesign standard. Emissions at 13% O₂ are: carbon monoxide (CO) – 708 mg/Nm³, dust – 22.8 mg/Nm³, nitrogen oxides (NOx) – 100.2 mg/Nm³ and organic hydrocarbons (OGC) – 50.3 mg/Nm³. All values are below the permitted limits for this type of appliance (CO 1500, dust 40, NOx 200 and OGC 120 mg/Nm³). For you, this means less wood for the same heat, less soot in the chimney and cleaner air around your home. The stove connects to a chimney with a diameter of Ø130 mm and requires a minimum draught of 12 Pa.

Technical Specifications