Wood Burning Fireplace Prity C2F, 21 kW

Wood Burning Fireplace Prity C2F, 21 kW – Fan-Assisted Air Ducts and Energy Class A+

The Prity C2F wood burning fireplace in an elegant black graphite finish is designed for people who want the heat from the fire to reach several rooms in the home. The unit is equipped with a blower fan (included), which pushes the heated air through air ducts to adjacent rooms. With a nominal heat output of 21 kW, it heats a volume of up to about 485–595 m³. Thanks to energy class A+ and an efficiency of 81.8%, the fireplace delivers the maximum amount of heat from every load of firewood. The large combustion chamber (607 x 607 mm) allows generous loading and long burning. Made in Bulgaria by Prity 95 Ltd – a manufacturer of heating appliances since 1995.

Advantages of the Prity C2F Wood Burning Fireplace

• Heating via air ducts – the warm air is distributed to adjacent rooms.
• Blower fan included – active and even distribution of heat.
• High heat output – 21 kW for a heated volume of up to about 595 m³.
• Energy class A+ and 81.8% efficiency – the highest efficiency among Prity's wood burning fireplaces.
• Large combustion chamber – 310 x 607 x 607 mm, for generous loading and long burning.
• Thermal-shock-resistant ceramic glass and cast iron grate – a clear view of the flame and even burning.
• Combustion control damper and manual flue damper – for control over the flame and the chimney draught.
• Sturdy steel body – made of 2 mm thick steel, with a 3–4 mm top plate and a wooden door handle.

Efficiency and Energy Class

The Prity C2F wood burning fireplace meets the European Ecodesign requirements, which guarantees low harmful emissions, high efficiency and environmentally friendly burning of wood. With energy class A+, 81.8% efficiency, compliance with the Ecodesign standard, CE certification and a 2-year warranty, it provides economical and eco-friendly heating. The chimney diameter is 200 mm with a top flue outlet.

Important for Installation and Use

• The fireplace requires a chimney with a diameter of 200 mm. The flue pipes must have the same diameter as the fireplace outlet.
• The fan needs a power supply – provide a socket near the fireplace when designing the surround.
• It is advisable to have the air duct system designed and installed by a specialist, together with the built-in installation and the surround made of non-combustible materials.
• The fireplace is heavy (188 kg) and tall (1130 mm) – check the load-bearing capacity of the floor and the height of the recess.
• Use dry firewood with a good calorific value.

Technical Specifications